Geppetto Modules

Audio Back to top

Audio Codec

overview

The Texas Instruments TLV320AIC3106 is a low-power Stereo CODEC with 10 Inputs, 7 Outputs, HP Amplifier and Enhanced Digital Effects. Geppetto uses it to provide audio input and output over a digital interface for systems without a native audio control system.

Buzzer

overview

An Audio Indicator Buzzer can be useful to attract someone's attention in a small system lacking sophisticated controls. This one from CUI CT-1205CL-SMT is used in many of our drone systems.

A pushbutton on the reverse side of the board lets the user silence the buzzer for 15 seconds

Dual Audio (in / out)

overview

Two low-profile, surface mount, 3.5mm audio jacks from CUI SJ-3523-SMT One is configured for stereo line-in; the other, for stereo audio output.

Line In Jack

overview

A low-profile, surface mount 3.5mm audio jack from CUI SJ-3523-SMT useful for stereo audio line-in.

Microphone

overview

This omnidirectional microphone from CUI provides an on-board sound input.
- range 100 ~ 20,000 Hz
- provides -42 ±3 dB at 1kHz

Speaker

overview

Using the Texas Instruments Boomer LM4862 675 mW Audio Power Amplifier, Geppetto drives a PUI Audio Speaker Model SMS-1308MS-2-R

Speaker Driver

overview

The ouput from a Texas Instruments Boomer LM4862 675 mW Audio Power Amplifier, Geppetto drives a pair of through-holes for an external speaker.

Stereo Headphone Jack

overview

A low-profile, surface mount 3.5mm audio jack from CUI SJ-3523-SMT

Stereo Headset Jack

overview

A low-profile, surface mount 3.5mm audio jack from CUI SJ-43514-SMT provides monaural microphone and stereo headphone over one jack.

COM Connectors Back to top

96Boards CE Connector

Overview

The 96Boards CE Mezzanine Connector consists of a 40-pin GPIO header and 60-pin high speed connector compliant with the 96Boards CE specification.

Main Features of 96Boards CE Specification

  • Minimum 512 MB RAM
  • MicroSDHC card slot
  • WiFi and Bluetooth
  • HD Video output
  • DSI display interface
  • CSI2 camera interface

Purchase 96Boards SBCs

BeagleBone Black COM Connector

overview

The BeagleBone Black COM connector consists of a pair of 2-row, 23-position male headers and a 2-position female header designed to connect to the BeagleBone Black Cape IOs.

Main features of the BeagleBone Black

  • TI Sitara AM3358 ARM Cortex-A8 processor at 1.0GHz
  • PowerVR SGX530 GPU
  • 4GB eMMC
  • HDMI
  • Bootable MicroSD

Purchase BeagleBone Black here

Colibri iMX6 (Toradex) Connector

overview

SO-DIMM connector and supporting electronics for the Toradex Colibri i.MX6 COM.

** Main Features of The Colibri i.MX6 **

  • Freescale/NXP i.MX6 Processor at 1.0 GHz
  • 256 MB DDR3 RAM
  • 4 GB eMMC
  • HDMI

COM Datasheet

Order Colibri i.MX6 Here

Dave - DIVA 335x Connector

overview

This SO-DIMM 204 pin connector allows users to build their own Dave DIVA carrier board.
DIVA is a family of system-on-modules (SOM) that belongs to Dave Embedded Systems LITE Line product class. DIVA is built with a form factor that allows it to be plugged into a SO-DIMM 204 pin connector.

Please see the Dave DIVA guidelines and disclaimers.

Main features of Dave DIVA:
* TI "Sitara" AM335x - Cortex-A8 32-Bit RISC MPU up to 1 GHz
* NEON SIMD Multimedia Coprocessor and PowerVR® SGX Graphics Engine
* Crypto Hardware Accelerator (AES, SHA, PKA, RNG)
* SO-DIMM 204-pin form factor
* Rich interfaces set including Dual CAN
* 10/100 Base-T Ethernet

Gumstix - DuoVero COM Connector

overview

Two 70-pin Hirose connectors and supporting hardware for the Gumstix DuoVero family of COMs.

Main features of DuoVero COMs

  • Texas Instruments OMAP4430
  • 1 GHz / 1GB NAND
  • SGX450 Graphics Processor
  • Multiple I/O Signals

The DuoVero Zephyr-Y adds

  • 802.11 b/g/n and Bluetooth 4.1

COM Spec sheet

Purchase COM here

Gumstix - Overo COM Connector

overview

Two 70-pin AVX connectors and supporting hardware for the Gumstix Overo family of COMs.

Main features of Gumstix Overo COMs:
* Texas Instruments AM3703/DM3730
* 800MHz / up to 1GB NAND
* Multiple I/O signals
* Optional SGX and DSP features
* Optional extended temperature components

Optional 802.11b/g/n WiFi with AP mode + Bluetooth 4.1 with BLE provided by the TI WiLink8

COM Spec sheet

Purchase COM here

Intel Edison COM

Overview

70-pin Hirose connector and supporting electronics for the Intel® Edison COM

Main Features of the Intel Edison COM

• Dual-core, dual-threaded Intel® Atom™ CPU at 500 MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz

• 1 GB LPDDR3 POP memory

• 4 GB eMMC

• Broadcom 43340 802.11 a/b/g/n dual-band (2.4 and 5 GHz)

• Bluetooth 4.0

• 40 digital input/output pins, including 4 pins as PWM outputs.

• 2 UART

• 2 I2C.

• 1 SPI

• 1 MCASP (audio)

• USB OTG

• MMC interface (SD card)

Edison Datasheet

Gumstix does not supply a custom kernel for the Intel Edison

Download development tools for the Edison from Intel

Intel® Joule™ Module Connector

Two 100-pin Hirose connectors and supporting electronics for the Intel® Joule™ compute module

Main Features of the Intel® Joule™

• 1.7 Ghz Quad-Core processor

• 3-4 GB RAM and 8-16GB eMMC

• 1080p HDMI

• MIPI DSI interface

• USB 2.0 with OTG support

• UART

• I2C and SPI interfaces

• Bluetooth 4.1 compliant

• Wi-Fi (802.11ac)

Compute module datasheet

MitySOM-335x (Critical Link) Connector

Image of MitySOM

A low profile SO-DIMM connector and supporting electronics for MitySOM-335X modules from Critical Link. The MitySOM-335x (shown below) contains power management, DDR2 SDRAM, NAND/NOR Flash memories and supports robust, high quality designs at affordable price points.

Main features of Critical Link MitySOM-335x:
* TI "Sitara" AM335x - Cortex-A8 32-Bit RISC MPU up to 1 GHz
* NEON SIMD Multimedia Coprocessor and PowerVR® SGX Graphics Engine
* Crypto Hardware Accelerator (AES, SHA, PKA, RNG)
* SO-DIMM 204-pin form factor
* Rich interfaces set including Dual CAN
* Gigabit Ethernet

Detailed technical documents are available here, and purchasing details are at Critical Link

PICO-IMX6 (TechNexion) Connector

overview

SO-DIMM Connector and supporting electronics for the TechNexion PICO-IMX6 COM.

Main Features of The TechNexion PICO-IMX6

  • Freescale/NXP i.MX6 Processor at 1.0 GHz
  • 512 MB to 1 GB DDR3 RAM
  • uSD card reader (IMX6-SD models only)
  • WiFi/Bluetooth
  • HDMI
  • Gigabit LAN
  • MIPI CSI Camera
  • MIPI DSI Display
  • GPU

COM Datasheet

Order PICO-IMX6 from Digi-Key

Raspberry Pi Compute Module Connector

overview

A low-profile SO-DIMM connector and supporting electronics for the Raspberry Pi Compute Module
The RPCM delivers the same hardware as the Raspberry Pi in a tiny SOM.

Main features of the Raspberry Pi Compute Module

  • Broadcom BCM2835 processor
  • 512 MB RAM
  • 4 GB eMMC
  • HDMI
  • CSI2 and DSI

Purchase COM here

Raspberry Pi HAT Connector

overview

The Raspberry Pi HAT connector that allows users to create their own Raspberry Pi HAT (Hardware Attached on Top), onto which they can snap on their Raspberry Pi.

Connectivity Back to top

GPIO Bridge (1 Pair)

overview

This Geppetto module connects 2 GPIO signals between two processors, using a bi-drectional voltage level translator TXS0102.

Some signals have two options, a 1.8V option and a 3.3V option. The former is used to connect to a 1.8V logic level signal and the latter to a 3.3V logic level signal.

HDMI to Parallel Converter

overveiw

The HDMI to Parallel converter module decodes the differential HDMI input signal into 24-bit parallel RGB values and display synchronization signals for LCD displays using the TI TFP401A PanelBus deserializer. This reciever is capable of converting video input at pixel rates up to 165 MHz.
The converter module enables the use of resistive touch dislays with compute devices not equipped with parallel display output.

Download Datasheet

Quad USB-UART

overview

This Geppetto module uses the FTDI FT4232H to connect up to four UARTs over a USB client interface, where required.

  • It provides an option for either two SPI or two JTAG to be substituted on two of the ports.

Quad USB-UART Expander

overview

Provides four UART/HART connections from a single USB HOST connection, using an 8-channel bi-directional level shifter TXS0108E and a FTDI FT4232 Quad USB - Serial converter FT4232HL, where required.

The FT4232HL can interface up to four devices over RS232 with an external USB connection.

RS232 to UART

overview

This Geppetto module provides an RS232 connector uses the MAX3232. The MAX3232 enable RS-232 perfromance from a 3.0V - 5.5V supply at data rates of 120 kB, where required.

RS485 to UART

overview

This Geppetto module provides RS485 communication based on TI's SN65176BD over UART, where required.

SPI Bridge

overview

This Geppetto module provides a SPI to SPI bridge, using a 8-channel, bi-directional level shifter TXS0108E.

Some signals have two options, a 1.8V option and a 3.3V option. The former is used to connect to a 1.8V logic level signal and the latter to a 3.3V logic level signal.

UART Mux (2 input)

overview

This Geppetto module allows two UART buses from a processor to be connected to a single peripheral using the TI TS3A5223.

Each signal has two options, a 1.8V option and a 3.3V option. The former is used to connect to a 1.8V logic level signal and the latter to a 3.3V logic level signal.

UART Mux (2 output)

overview

This Geppetto module uses the TI TS3A5223 to allow a single UART from a processor to be select from one of two UART peripherals.

Each signal has two options, a 1.8V option and a 3.3V option. The former is used to connect to a 1.8V logic level signal and the latter to a 3.3V logic level signal.

UART-UART

This Geppetto module uses the TI SN74AVC2T245 to provide communication between 2 UART data buses, where required.

The UART2 signal has two options UART21.8 and UART23.3. The former will connect to a 1.8V logic level UART. The latter will connect to a 3.3V logic level UART.

USB - JTAG

overview

This Geppetto module uses the FTDI FT2232D to connect up to 4 UARTs over a USB client interface. It also provides an option for SPI or JTAG substituting on 2 of the ports.

USB Bridge

overview

This Geppetto module lets a USB Host connect directly to a USB Device within a board designed in Geppetto.

USB-UART

overview

This Geppetto module provides a USB to serial UART interface using the FTDI FT232RQ, where required.

Headers Back to top

16-Pin Female Header

overview

16 pin female header with 8-channel bi-directional level-shifter

20-Pin Male Header

overview

20-pin male header, 16 of which are available for GPIO use at voltage levels of 1.8v to 5.0v.

27-Pin Connector (COM side)

overview

Provides a 27-pin FFC connector used with the Caspa camera family and other parallel camera interfaces.

4-pin Analog Header

overview

2x2 Male pin header, 0.1"

40 Pin Header

overview

40 Pin Header using the TI TXS0108E Bidirectional Voltage-Level translator, supporting maximum data rates of 60 Mbps Push Pull and 2 Mpbs Open Drain.

6-Pin Analog Female Header

overview

2 x 6, 0.1" female header for ground, power and ADCIN and an empty 1 x 6, 0.1" female header.

CAN Header

overview

This module uses the TI SN65HVD232 CAN transceiver to provide CAN protocol headers that transmit and receive at speeds up to 1 Mbps.

COM to CSI2 Connector

overview

The Raspberry Pi boards provide a camera interface that conforms to the CSI2 interface, over a 15-conductor flex cable.

COM to DSI Connector

overview

The Raspberry Pi boards provide a serial display interface that conforms to the MIPI DSI interface, over a 15-pin, conductor flex cable.

Dual PWM Header

overview

This Geppeto module breaks out PWM pins from the processor.

It consists of two sets of 3-wire servo pins at a right angle.

Dual USB Host Pin Header

overview

Breaks out two USB host ports to a pin header commonly found on motherboards.

Five-pin GPS Header

Overview

This module allows for an external GPS board to be connected over a five-pin connection.

Works with 3DR GPS board or any of the Pre-GO boards from Gumstix.

I2C Header

overview

This I2C Header provides a level shifter to either 1.8v, 3.3v or 5.0v.

JTAG Header (mini ARM)

overview

ARM JTAG male header, 10-position.

NC

overview

NC for GPIO

Octal PWM Header

overview

This Geppetto module breaks out PWM pins from the processor.

It consists of eight sets of 3-wire servo pins which are PWM-driven connections for motors.

Parallel Camera Connector

overview

Exposes parallel imaging interface as used by the Overo. Use this to insert a flex-circuit with the Overo at the other end.

Single PWM Header

overview

This Geppeto module breaks out a PWM pin from the processor.

It consists of 3-wire servo pins at a right angle.

Single PWM Header (Vertical)

overview

This Geppeto module breaks out a PWM pin from the processor.

It consists of 3-wire servo pins oriented vertically.

Spektrum DSM-2 Remote Connector

overview

Use this connector to connect to the remote port on a Spektrum DSM-2 RC receiver.

SPI Header

overview

SPI , 2x3 male pin header, 0.1" with 8-bit, bi-directional voltage-level translator for open-drain and push-pull
applications, TXS0108E.

Triple PWM Header

overview

This Geppeto module breaks out PWM pins from the processor.

It consists of three sets of 3-wire servo pins at a right angle.

UART Header

overview

2x2 male header and a SN74AVC2T245 (a dual-bit dual-supply bus transceiver with configurable level-shifting /
voltage translation and tri-state outputs)

IO Back to top

Blue LED

overview

Blue LED placed on the topside of the board.

Flip-side Blue LED

overview

Identical module to the Blue LED except that the module is placed on the backside.

Flip-side Green LED

overview

Identical module to the Green LED except that the module is placed on the backside.

Flip-side LED

overview

Flip-side LED with four color options (green, blue, yellow and red) to choose from.

Flip-side Red LED

overview

Identical module to the Red LED except that the module is placed on the backside.

Flip-side Tactile Switch

overview

Vertical tactile switch placed on the flip-side of the board.

Flip-side Yellow LED

overview

Identical module to the Yellow LED except that the module is placed on the backside.

Green LED

overview

Green LED placed on the topside of the board.

Ground Testing Point

overview

Ground Testing Point

Red LED

overview

Red LED placed on the topside of the board.

Tactile Switch

overview

Vertical tactile switch

Top-side LED

overview

Top-side LED with four color options (green, blue, yellow and red) to choose from.

Yellow LED

overview

Yellow LED placed on the topside of the board.

LCD Display Back to top

3.5" Flip-Side Connector For In Touch Resistive Touchscreen

overview

Flip-side low-profile FPC/FFC connector for the In Touch 3.5" LCD Resistive Touchscreen.

3.5" Top-Side Connector For In Touch Resistive Touchscreen

overview

Topside surface-mounted, low-profile FPC/FFC connector for the In Touch 3.5" LCD Resistive Touchscreen.

4.3" Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 4.3" capacitive multi-touch screen (screen sold separately). It consists of:

  • FFC/FPC connector, right-angle, surface mount, ZIF, top contact style receptacle, 6 circuits, high-barrier packaging.
  • 0.5mm pitch, 40-pin, FFC/FPC connector, horizontal mounting type.

4.3" Flip-Side Connector For Newhaven Resistive Touchscreen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 4.3" resistive touchscreen (screen sold separately).

4.3" Top-Side Connector For Newhaven Capacitive Multi-Touch Screen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 4.3" capacitive multi-touch screen (screen sold separately). It consists of:

  • FFC/FPC connector, right-angle, surface mount, ZIF, top contact style receptacle, 6 circuits, high-barrier packaging.
  • 0.5mm pitch, 40-pin, FFC/FPC connector, horizontal mounting type.

4.3" Top-Side Connector For Newhaven Resistive Touchscreen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 4.3" resistive touchscreen (screen sold separately).

5.0" Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 5.0" capacitive multi-touch screen (screen sold separately). It consists of:

  • FFC/FPC connector, right-angle, surface mount, ZIF, top contact style receptacle, 6 circuits, high-barrier packaging.
  • 0.5mm pitch, 40-pin, FFC/FPC connector, horizontal mounting type.

7.0" Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen

overview

A parallel RGB, 4-wire interface to connect to a Newhaven 7.0" capacitive multi-touch screen (screen sold separately). It consists of:

  • FFC/FPC connector, right-angle, surface mount, ZIF, top contact style receptacle, 6 circuits, high-barrier packaging.
  • 0.5mm pitch, 40-pin, FFC/FPC connector, horizontal mounting type.

Mechanical Back to top

Mounting Hole (2.2mm)

overview

2.2mm Mounting Hole

Mounting Hole (2.9mm)

overview

2.9mm Mounting Hole

Mounting Hole (3.5mm)

overview

3.5mm mounting hole

Memory Back to top

1K EEPROM

overview

The AT24C01B-TH_B is a 1kBit EEPROM (Electrically Erasable and Programmable Read-Only Memory) organized as 128 words of 8 bits each for low-power and low-voltage operations.

8GB eMMC Memory

overview

8GB, 8-bit, dual-voltage, 100-LBGA, NAND flash eMMC memory.

Useful in the following application scenarios:

  • In boards where microSD cards may be a liability due to errors caused by vibrations on the boards that they are attached to.
  • eMMC is better at wear-leveling and can provide a reliable storage option compared to the microSD cards.

Boot MicroSD Card Slot

overview

Boot MicroSD Card Slot

FRAM (128 KB)

overview

The MB85RS1MT is a FRAM (Ferroelectric Random Access Memory) chip in a configuration of 131,072 words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells.

microSD slot

overview

microSD slot for storage

Monitors Back to top

DVI HDMI

overview

Connect to an HDMI/DVI-D enabled monitor or television with an HDMI or HDMI-to-DVI cable with the surface-mounted HDMI connector and the TI's DVI controller.

microHDMI

overview

Connect to an HDMI/DVI-D enabled monitor or television with an microHDMI-to-HDMI or a microHDMI-to-DVI cable with the surface-mounted microHDMI connector and the TI DVI controller.

Native HDMI receptacle

overview

Onboard HDMI receptacle from Molex that allows connecting a HDMI enabled monitor or television using a HDMI cable.

Native micro-HDMI receptacle

overview

Onboard HDMI receptacle from Molex that allows connecting a HDMI enabled monitor or television using a HDMI cable.

Network Back to top

10/100BASE-T

overview

Single-chip 10/100base IEEE 802.3 compliant Ethernet controller.

Atheros Gigabit Ethernet

Single-chip, 10/100/1000 Base-T IEEE 802.3 compliant Ethernet controller.

This works with any processor that exposes its RGMII bus (such as the AM3354).

Gigabit Ethernet

overview

Single-chip, 10/100/1000 Base-T IEEE 802.3 compliant Ethernet controller.

This works with any processor that exposes its RGMII bus (such as the AM3354).

USB-Ethernet Module with Hub

overview

Provides Ethernet and USB via the LAN 9512 Ethernet USB chip. Features:

  • 10/100 Ethernet with RJ45 connector
  • 2 x downstream USB conections

ZigBee

overview

A 2.4GHZ IEEE Std. 802.15.4™ compliant, surface mount ZigBee module with integrated crystal, internal voltage regulator, matching circuitry and PCB antenna.

  • Operates in the non-licensed 2.4GHZ frequency band and is FCC, IC and ETSI compliant.

Power Back to top

1.8V/0.15A LDO

overview

This 1.8V/0.15A LDO is provided by the Micrel MIC5247 and offers 1% initial accuracy and 85µA constant ground current over load.

1.8V/0.6A Regulator

overview

This module is a 1.8V/0.6A regulator using the Enpiron EP5368 and provides high efficiency up to 92% with an input range of 2.4V -5.5V.

3.3V/0.15A LDO

overview

This 3.3V/0.15A LDO voltage regulator is provided by the Micrel MIC5255 and provides 1% initial accuracy and low ground current.

3.3V/1.5A Regulator

overview

Synchronous Step-Down Converter TPS62111 that provides a regulated 3.3V rail to electronic devices. Efficiency ranges between approximately 90% and as high as 95% depending on current.

5V/5A Pigtail regulator

overview

5V/5A regulator with solder connections for an external battery and has to be placed on one of the edges of the board.

This module is a 5V/5A regulator using TI's TPS5450 and provides high efficiency greater than 90% with a wide input range of 5.5V to 36V.

5V/5A Regulator

overview

5V/5A Regulator which requires a battery connector.

This module is a 5V/5A regulator using TI's TPS5450 and provides high efficiency greater than 90% with a wide input range of 5.5V to 36V.

Unlike the 5V/5A Pigtail regulator, this can be placed anywhere on the board but requires an additional battery connection.

Backlight Controller

overview

Backlight Controller

Battery - Pigtail

overview

Pigtail connector to battery.

Battery & Barrel Power Supply

overview

Battery 2S balance connector with 5V/5A regulator and 5V/3A barrel connector. Priority given to battery power.

CoinCell Backup

overview

Rechargeable CoinCell Battery ML-621S/ZTN

Dummy Power Provider

Provides power buses for use in Geppetto web without actually doing anything. This is just a means to fulfill power requirements while in Geppetto web. Power must be provided by some other means.

Fused Power Switch

overview

FET driven slide power switch with 5mm x 20mm cartridge fuse.

Fused Power Switch (PTC)

overview

FET driven slide power switch with 2920 5A PTC fuse.

NC - Battery

No-connect for a battery voltage sense, for DRC purposes.

Power Muxer (two 5V sources)

overview

Power muxer and current limited switches (TPS2115), which automatically switch between two 5V sources, giving preference to source labelled 1.

Real Time Clock

overview

Requires backup-battery. Consists of an I2C based trickle charger DS1340, a battery connector ML-621S/ZTN and a 32.768kHz tiny crystal CM415-32.768KDCF-UB.

Power Connectors Back to top

Barrel Connector (20V 3A)

This module provides a barrel connector for a 20V/3A adapter

Barrel Connector (5V 1A)

overview

A low-profile, surface mount DC Power Connector from CUI PJ1-022 provides 5V input for an external wall-wart.

Barrel Connector (5V 3A)

overview

This module provides a barrel connector for a 5V/3A adapter

Battery 2-Cell Balance Connector

overview

Standard two-cell Lithium-Polymer balance connector [JST-XH Top 3Pos 2.5mm] ( http://www.digikey.com/product-detail/en/B3B-XH-A(LF)(SN)/455-2248-ND/1651046 ).

Five-pin GPS Right Angle Connector

overview

This module is a companion to the five-pin GPS header. It is used on an external GPS board, for connection to a base board.

A five-pin cable can be used to attach the five-pin GPS header on the base board to the five-pin right angle GPS header on the GPS board (such as the Pre-GO PPP).

USB microB (power only)

overview

Power from a microUSB connector

Processors Back to top

Intel® Curie™ Module

overview

The Intel® Curie™ is a surface mounted, tiny, 8x10 mm microcontroller for IoT and wearable technology.

Intel Curie Datasheet

Intel Curie <-> Arduino 101 Pin Mapping

Intel Curie Arduino User Guide

Main Features of the Intel® Curie™ Module

  • 32-bit Intel® Quark™ MCU
  • 384kB flash memory
  • 80kB SRAM
  • integrated DSP sensor hub
  • BLE
  • 6-axis IMU
  • battery charging circuitry (PMIC)

ST Micro Cortex-M4

overview

Add camera, display, and audio functionality with the STM32F427 microcontroller, based on the 32-bit ARM Cortex-M4 core.
* 180MHz
* Up to 2MB Flash
* Up to 256+4 kB SRAM

Interfaces include, up to:
- 3 x I2C
- 6 x SPI
- 4 x USART
- 2 x CAN
- 1 x USB OTG

TI Sitara AM3354

overview

Add display and audio functionality with the AM3354, based on the ARM Cortex-A8 processor

  • 800MHz
  • 512MB DDR3
  • SGX530X 3D Graphics Engine

Interfaces include, up to:
- 60 x GPIO
- 2 x SPI
- 3 x I2C
- 4 X UART
- 3 X PWM
- 2 X USB DEVICE/HOST/OTG

TI Sitara AM3354 (Slim Version)

overview

Add display and audio functionality with the AM3354, based on the ARM Cortex-A8 processor

  • 800MHz
  • 512MB DDR3
  • SGX530X 3D Graphics Engine

Interfaces include, up to:
- 60 x GPIO
- 2 x SPI
- 3 x I2C
- 4 X UART
- 3 X PWM
- 2 X USB DEVICE/HOST/OTG

TI Sitara AM4378

overview

Get the latest, full-featured ARM Cortex-A9 based processor from TI with the Sitara AM4378 in a space-optimized module.

  • 1.0 GHz
  • 512 MB DDR3 RAM
  • SGX530 embedded GPU
  • PRU-ICSS for industrial-grade Ethernet

Interfaces include
- up to 40 x GPIO
- 3 x I2C
- 3 x SPI
- 2 x 8-input ADC
- 3 x UART
- 2 x Parallel Camera Interface
- 1 x USB Host
- 1 x USB Device
- 2 x MMC

Sensors Back to top

9-Axis IMU

overview

9-axis Inertial Measurement Unit communicating over SPI or I2C. Uses the L3GD20H gyroscope and LSM303D compass modules to provide 9-axis at data rates over 100Hz

LSM303D Datasheet

L3GD20H Datasheet

Ambient Temperature Sensor

overview

Surface mounted I²C Digital TMP102 Temperature Sensor from Texas Instruments.

  • SOT-563 Package
  • Range: -40°C ~ 125°C
  • Accuracy: ±3°C(Max)

Download Datasheet

Barometer

overview

The barometer module is an ultra-compact, low-power barometric pressure sensor useful for aerial vehicles.
The module's MS5611-01BA03 Barometric Pressure Sensor offers a high resolution reading, accurate to within 10 cm and is optimized for altimeter and variometer applications.
It can communicate serially either over I2C or SPI buses.

  • Resolution - 10cm

Download Datasheet

Humidity Sensor

overview

The humidity sensor module uses the Silicon Labs Si7021-A20 humidity and temperature sensor to measure ambient humidity.
The module communicates with host devices serially over I2C.

  • High Accuracy Temperature Sensor
  • ±0.4 °C (max), –10 to 85 °C
  • Integrated on-chip heater

Download Datasheet

Neo-7M GNSS GPS Receiver

overview

The Neo-7M GNSS GPS receiver module is a GNSS receiver and antenna mounted directly onto a Geppetto board.
The functional components of the module include:

  • Taoglas SGP.1575.12.4.A.02 SMT antenna: Datasheet
  • EPCOS B9415 SAW filter
  • UBlox Neo-7M GPS Receiver Module: Datasheet
  • Maxim Integrated MAX2659 Low-Noise Amplifier: Datasheet

RGB Light Sensor

overview

RGB light sensor module provides accurate RGB spectral response over I2C.
The Intersil ISL29125 Digital Color Light Sensor used in this module has a built-in IR filter
and a configurable interrupt signal.

• I2C (SMBus compatible) output

• ADC resolution: 16 bits

• Programmable interrupt windows

Download Datasheet

Tiny Camera

overview

Tiny Camera

Integrate computer vision into your slim design with this miniature camera sensor. At <1.0cm2, the Tiny Camera Geppetto module will fit just about anywhere.

  • OmniVision OV7692 Camera Cube sensor
  • 640 x 480 px resolution
  • 30 FPS
  • Integrated lens
  • 6.5 x 8.5 mm footprint

Download OV7692 Datasheet

Related Products
* Tiny Caspa 3MP 27-pin Camera Board

USB Back to top

3-Port USB Client Hub

The 3-Port USB Hub is fully compliant with USB 2.0 Standards and will attach to an upstream port and 3 downstream ports. This connects USB devices together, not to be used with a mini-B or micro-B USB connector.

3-Port USB Hub

Overview

The 3-Port USB Hub is fully compliant with USB 2.0 Standards and will attach to an upstream port and 3 downstream ports.

4-Port USB 3.0 Hub

The 4-Port USB 3.0 Hub is fully compliant with USB 3.0 Standards and will attach to an upstream port and 4 downstream ports.

7-Port USB Hub

The 7-Port USB Hub is fully compliant with USB 2.0 Standards and will attach to an upstream port and 7 downstream ports.

Dual Stacked USB 3.0 Type A

Dual stacked, USB 3.0 Type A receptacle, through hole, right angle, horizontal.

For use in situations where horizontal I/O port space is limited.

Dual Stacked USB Type A

overview

Dual stacked, USB Type A receptacle, through hole, right angle, horizontal.

For use in situations where horizontal I/O port space is limited.

Intel® Joule™ USB 3.0 Type-C Jack

A USB 3.0 Type-C jack that connects to the Intel® Joule™ module. This jack makes use of the Intel® Joule™ module's built-in Type-C functionality, allowing the device to function as a DRP (dual role port).

Micro-AB USB

overview

The micro-AB receptacle allows the device to act as the host or the peripheral and is compliant with the requirements of Micro-USB (USB 2.0) standard.

Micro-B Jack

overview

The micro-B jack allows the device to act as the peripheral and is compliant with Micro-USB (USB 2.0) standard.

Mini-B Jack

overview

USB Mini-B jack that complies with the requirements of Mini-USB (USB 2.0) standard.

Standard-A Jack

overview

USB Standard-A jack, compliant with USB 2.0 standard.

Standard-A Plug

overview

USB Standard-A plug, compliant with USB 2.0 standard.

USB 3.0 Standard-A Jack (THRU)

USB Standard-A jack, compliant with USB 3.0 standard. Uses thru-hole connector.

USB 3.0 Standard-A Jack (Vertical)

USB Standard-A jack, compliant with USB 3.0 standard. Uses thru-hole connector and is mounted vertically.

USB mini-B (Vertical)

overview

A vertical USB Mini-B jack that complies with the requirements of Mini-USB (USB 2.0) standard, allowing for USB cables to be plugged into a board from the top.

USB Standard-A Jack (vertical)

overview

Vertical USB Standard-A jack, compliant with USB 2.0 standard.

Last updated May 26, 2017 11:26